X

     

    Our Products

    Mineral Processing Equipment

    Rotary Vezin Samplers

    Accurate sampling of slurry or dry solids, following the latest recommendations of existing sampling standards or consultant suggestions. Easy to install self-contained modules for continuous or intermittent modes of operation with various inlet and enclosure sizes. 2” to 18” diam. inlets for slurry pipes, rectangular flange inlets for dry solids chutes. 1-piece cutter caps for correct blade installation. Natural rubber inner surfaces with other materials available.




    Model 4510-3200

    Can be installed as a primary or secondary device to take metallurgical accounting samples of slurry. 60 degree cutter discharge angle. Cutter arrangements of 1 to 3 sets. 2 inch diameter inlets. Inspection doors on top for cutter inspection and replacement.



    Model 4620

    Can be installed as a primary or secondary device to take metallurgical accounting samples of slurry streams. Using radial designed cutter, with 30 degree discharge angle, available with cutter arrangements of 1 to 4 sets, for 4 or 6 inch diameter inlets. Inspection doors on top for cutter inspection and replacement.



    Model 4710-3500

    Can be installed as a primary or secondary device to take metallurgical accounting samples of slurry or dry granular solids streams. 45 degree cutter discharge angle can be used with lower % solids slurry or dry granular material. Cutter arrangements of 1 to 4 sets. 2, 2½ or 3 inch diameter inlets. Cutter inspection doors on top and side.



    Model 4720

    Can be installed as a primary or secondary device to take metallurgical accounting samples of slurry or dry granular solids streams. Using radial designed cutter, with 45 degree discharge angle, available with cutter arrangements of 1 to 4 sets, for 4 or 6 inch diameter inlets. Inspection doors on top for cutter inspection and replacement.





    Model 4810-3500

    Can be installed as a primary or secondary device to take metallurgical accounting samples of slurry or dry granular solids streams. 60 degree cutter discharge angle for best free flowing of higher % solids slurry or slightly moist granular material. Cutter arrangements of 1 to 4 sets. 2, 2½ or 3 inch diameter inlets. Inspection doors on top and side for cutter inspection and replacement.



    Model 4820

    Can be installed as a primary or secondary device to take metallurgical accounting samples of dry granular solids streams. Using radial designed cutter, with 60 degree discharge angle, available with cutter arrangements of 1 to 4 sets, for 4 or 6 inch square inlets and 8” outlet. Inspection doors on top for cutter inspection and replacement.


    Additional Rotary Vezin Samplers

    • Select model by cutter discharge angle:
      4600 Series models have 30 degree angle, 4700 Series models have 45 degree angle,
      4800 Series models have 60 degree angle, 4900 Series models have 70 degree angle.

               


    • Then select inlet size/diameter:

     
    Model


    Inlet


    Diameter


    Available

     
    4610
    4620
    4630
    4640
    4650

    2"
    4"
    8"
    12"
    16"


    2.5"
    6"
    10"
    14"
    18"

    3"