X

    Request for Quote

    Solids Sampling Questionnaire

    Please fill out the form below and give us as much information about yourself as possible.

    We will only use your e-mail address and information supplied by you to contact you about services/products that you have indicated are of interest to you.



    Contact Information

    Fields marked with an asterisk (*) are required.
    Purpose
    Size Consistency   Moisture   Process Control (Analyzer)
    Metallurgical Accounting   Inventory Control   Other
    Target Date for Installation:
    Pricing: Budget        Firm
    Quote Required by
    Process Characteristics 
    Location (e.g. SAG Mill Feed) Continuous   Intermittent
    Duration of Process Flow at Sample Point (hrs/day)
    Sample Interval (i.e. 3x/hr, etc.)
    Hours per Shift
    Final Amount of Sample Req'd: Shift/Day
    Remarks
    Material Characteristics 
    Feed Rate(TPH):   Min.        Max.      Normal 
    Bulk Density  
    Maximum Particle Size   %Moisture 
    S.G. Solids          Ambient Temperature: Min.      Max. 
    Location of Sampler  Interior     Exterior
    Special Considerations   Abrasive properties   Low     High
    Special Considerations    Grindability  Standard     Difficult 
    Remarks
    Feed Conditions  
    Belt Conveyor:   Belt Width      Belt Speed:      ft/sec     m/sec
    Inclination from Horizontal: ±      Idler Trough Angle:      Head Pulley dia: 
    Remarks
    Chute: Preceding Process Equip.: (i.e.Feeder,Screen,Filter,etc)
    Discharge: Constant Intermittent
    Cross Section:  : (input as x by y)
    Angle From Horizontal:     Vertical   FreeFall  
    Other Applications(Special Feed Conditions):
    Remarks
    Electric Controls  
    Power:  Volt:      Cycle(Hz):  
    Special Options (Interlocks, Alarm Relays, Sensor Position)
    Enclosure Rating(i.e. Nema 4, Nema 4x, Nema 12)                
    Motor Power:  Volt:      Cycle(Hz):  
    Motor Enclosure(i.e. TEFC, Drip-proof):         Insulation Class:
    Remarks
    Miscellaneous  
    Hazards:
    Special provisions(i.e.Preferred Motor manufacturer):